You stated A while back the dryer started beeping during the drying cycle. Is this not true? Hi Woody, I talked to the tenant today andgot the detail. As long as the dryer is plugged in, the random, constantbeeping is there no matter it is on a drying cycle or not. They have to unplugit to shut it up. If unplugged for 10 minutes or so it seems to come back to life.
I am wide open to any suggestions you can offer. Also you mentioned replacing the board. You don't have a part number for that one board do you? I can only locate the whole control panel assembly. Show 7 more comments. Deepak Duggal. Fix Your Stuff Community Store. Back Answers Index. View the answer I have this problem too Subscribed to new answers. Is this a good question? Yes No. Voted Undo. Score 1. Chosen Solution. You're done put it back together and try it.
Bought the diodes and soldered them in as shown. Dryer worked as it should. The next day the display was dead. No response from button pushes. The only way I could get it to work again was to unplug the board connections and plug back in, cycling power does nothing. This continues to be the problem. Then dead again. I have gone back and made sure the traces are cut well. Any ideas anyone?. The problem is NOT in the buttons, the moisture and corrosion that cause this problem resides under the black ribbon cable Connectors on the boards!!
Have successfully repaired mine by removing the connector on the board. It was not easy and you have to be very patient and carefull to cut it off hacksaw blade and olfa knife without hurting the pins. When you have removed the plastic from around the pins and re-soldered any that have been broken in the process then clean the area with a good contact cleaner and compressed air.
Reattach the ribbons to yes the bare pins. Coat the connections and parts with a good quality acrylic electrical coating 2 or 3 coats between drying. Put the thing back together and your good to go. This bit of info is about to help alot of people, spread the word.
I may throw together a bit of a youtube vid on this if there are enough questions. I removed 2, the one on the modifiers board and the one same short ribbon on the cycle controll board. Last edited: Nov 11, Cwright said:. Similar threads C. Kenmore Elite HE4 Dryer Replies 5 Views Oct 29, Jake. Toenail Jul 18, Sears Kenmore. Replies 8 Views Jul 31, Jake.
FIXED Sep 12, jeff1. Replies 3 Views Feb 12, Jake. Kenmore Dryer Replies 6 Views Example E The four indicator lights would flash twice indicating the 2 and the START indicator light will flash four times indicating the 4. The control will pause for 2 seconds, then repeat the code. For more assistance, you can reply with the complete model number and also the number of times its beeping and we will assist you further.
I hope this will help you. If you would like to have a technician check this, you can call to schedule a tech to come out.
It is non digital but it does not have drying, cool down, wrinkle rid, or clean lint filter lights. Yes the model number is It usually beeps 3 beeps in a row, over and over again. Sometimes it does 5 beeps. It does not do 4 or 6 beeps as listed in the manual.
I've also just realized I don't think it is using heat to dry clothes even though I have it set on high heat. The other night the drier ran all night without shutting off when clothes were dry. But then I just dried another load and it stopped just fine on its own, but no heat.
0コメント